Front doors - Revision history

Pokseva: /* Removing and installing loudspeakers in front doors */

2025-08-22T16:03:43Z

Removing and installing loudspeakers in front doors

@@ Line 92: / Line 92: @@
 |[[File:W220_front_left_door_panelling_inside_latch_and_handle_illumination_module.jpg|thumb|none|Latch guide and handle illumination module.]]
 |}
 ==Removing and installing front door lock==
@@ Line 171: / Line 198: @@
 [[File:W220_front_left_door_lock_reinstalled.jpg|thumb|none|Door lock reinstalled.]]
 ==Removing and installing exterior door handle on front door==

Pokseva: /* Remove/install door lining on front door */ moved to appropriate page

2022-08-30T07:19:06Z

Remove/install door lining on front door: moved to appropriate page

← Older revision		Revision as of 07:19, 30 August 2022
Line 1:		Line 1:
	~~==Remove/install door control module==~~

	~~Shown on model 220:~~

	~~This video shows in detail how to replace the Door Control Module which is the central brains behind all door functions including most power window functions.~~
	In the case of the specific issue in this video, as soon as the engine was turned on, the driver window would automatically roll down. Replacing the Door Control Module with a used part from eBay for
	~~around $40 as of Aug 2022, fixed the issue. Another solution would be to reprogram the module but that requires special tools and access not afforded to most DIYers.~~
	{\|
	~~\|{{#ev:youtube\|https://youtu.be/Bu6hFyjh6NQ\|320\|left\|Replace S600 S50 S430 S55AMG Door Control Module (By Masood)\|frame}}~~
	\|}

	==Remove/install door lining on front door==		==Remove/install door lining on front door==
	<!-- AR72.10-P-1000M, Remove/install door lining on front door, 11.9.97		<!-- AR72.10-P-1000M, Remove/install door lining on front door, 11.9.97

Masood at 17:30, 21 August 2022

2022-08-21T17:30:28Z

@@ Line 1: / Line 1: @@
 ==Remove/install door lining on front door==
 <!-- AR72.10-P-1000M, Remove/install door lining on front door, 11.9.97
@@ Line 75: / Line 86: @@
 # Check door foil and fastening clips (9). Installation: Replace damaged door foil and fastening clips (9).
 # Install in the reverse order

Masood at 17:24, 21 August 2022

2022-08-21T17:24:04Z

← Older revision		Revision as of 17:24, 21 August 2022
Line 75:		Line 75:
	# Check door foil and fastening clips (9). Installation: Replace damaged door foil and fastening clips (9).		# Check door foil and fastening clips (9). Installation: Replace damaged door foil and fastening clips (9).
	# Install in the reverse order		# Install in the reverse order

			This video shows in detail how to replace the Door Control Module which is the central brains behind all door functions including most power window functions.
			In the case of the specific issue in this video, as soon as the engine was turned on, the driver window would automatically roll down. Replacing the Door Control Module with a used part from eBay for
			around $40 as of Aug 2022, fixed the issue. Another solution would be to reprogram the module but that requires special tools and access not afforded to most DIYers.
			{\|
			\|{{#ev:youtube\|https://youtu.be/Bu6hFyjh6NQ\|320\|left\|Replace S600 S50 S430 S55AMG Door Control Module (By Masood)\|frame}}
			\|}


	{\|		{\|

Pokseva: /* Remove/install front door side airbag unit */ error code added

2017-10-14T10:52:38Z

Remove/install front door side airbag unit: error code added

@@ Line 336: / Line 336: @@
 |[[File:W220_front_left_door_airbag_installed.jpg|thumb|none|Front left door airbag.]]
 |[[File:W220_front_left_door_airbag_connected.jpg|thumb|none|Connection to airbag.]]
 |}

Pokseva: /* Remove/install front door side airbag unit */

2017-08-30T10:18:17Z

Remove/install front door side airbag unit

@@ Line 84: / Line 84: @@
 |[[File:W220_front_left_door_panelling_removed.jpg|thumb|none|Front left door with panelling removed.]]
 |[[File:W220_front_left_door_panelling_removed_keyless-go_antenna.jpg|thumb|none|[[KEYLESS-GO]] antenna.]]
 |[[File:W220_front_left_door_wires.jpg|thumb|none|Front left door wiring.]]
 |}
@@ Line 310: / Line 306: @@
 * Screw for front door handle: 3 Nm
 * Adjustment values for side door: Clearance: 2(+-1)mm
 ==Remove/install front door power window switch group==
 <!--
 AR72.29-P-0110M, Remove/install front door power window switch group, 23.10.97
 MODEL 220
 -->
 {|
 |[[File:W220_Remove_install_front_door_power_window_switch_group.jpg]]

Pokseva: photos added

2017-08-29T16:58:36Z

photos added

@@ Line 79: / Line 79: @@
 |{{#ev:youtube|https://www.youtube.com/watch?v=UepxCXwGitY|320|left|Front door panel removal (facelift).|frame}}
 |{{#ev:youtube|https://www.youtube.com/watch?v=HTM-0lcFpMk|320|left|Front door panel removal (pre-facelift).|frame}}
 |}
@@ Line 113: / Line 128: @@
 Removing:
 # Remove door liner on front door
-# Remove crank operated window on front door
+# [[windows|Remove crank operated window]] on front door
 # Unhook Bowden cable (1) for inside door opener onto door lock (6) and remove. Unclip holder (8) on lock.
 # Open retainer (4) for unlocking bar (3).
@@ Line 141: / Line 156: @@
 * Screw on door lock: 10 Nm
 * Front door test values: Clearance: 2(+-1)mm
 ==Removing and installing exterior door handle on front door==
@@ Line 321: / Line 355: @@
 # Remove switch cover from right front power window switch (S19s1). For this purpose press retaining lugs (arrows) for right front power window switch (S19s1) together with suitable tool until right front power window switch (S19s1) can be pressed out of switch cover toward inside.
 # Install in the reverse order

Pokseva at 08:59, 8 August 2017

2017-08-08T08:59:32Z

← Older revision		Revision as of 08:59, 8 August 2017
Line 277:		Line 277:
	* Adjustment values for side door: Clearance: 2(+-1)mm		* Adjustment values for side door: Clearance: 2(+-1)mm

			==Remove/install front door power window switch group==

			<!--
			AR72.29-P-0110M, Remove/install front door power window switch group, 23.10.97
			MODEL 220
			-->

			{\|
			\|[[File:W220_Remove_install_front_door_power_window_switch_group.jpg]]
			\|
			* 1 - Molding
			* 2 - Door control module cover
			* 3 - Door handle cover
			* 4 - Door trim panel
			* 5 - Switch group cover
			* 6 - Assembly wedge
			* S20/1 - Switch group for power window, driver's side
			\|}

			# Press molding strip (1) out of door control module cover (2) on driver's door with assembly wedge (6)
			# Remove door handle cover (3) from door handle in direction of arrow
			# Unscrew door control module cover (2) from door liner (4) of driver's door and press off with assembly wedge (6)
			# Unclip switch group cover (5) with switch group for power window, driver's side (S20/1) from door liner. For this purpose slightly press cover in at bottom edge (arrow) and lift until cover can be removed together with switch group for power window, driver's side (S20/1).
			# Remove power window switch group connector, driver's side from door control module.
			# Remove switch group cover (5) from power window switch group, driver's side (S20/1). For this purpose press retaining lugs (arrows) for power window switch group, driver's side (S20/1) together with suitable tool until power window switch group, driver's side (S20/1) can be removed out of switch group cover (5) toward inside. Power window switch group, driver's side (S20/1) can only be replaced completely.
			# Install in the reverse order

			==Remove/install front power window switches==
			<!-- AR72.29-P-0100M, Remove/install front power window switches, 23.10.97
			MODEL 220
			-->

			{\|
			\|[[File:W220_Remove_install_front_power_window_switches.jpg]]
			\|
			* 1 - Switch cover
			* 2 - Door trim panel
			* S19s1 - Right front power window switch
			\|}

			# Unclip switch cover (1) with right front power window switch (S19s1) from door liner (2) on passenger door. For this purpose lift switch cover (1) at bottom edge (arrow) until switch cover (1) can be removed with right front power window switch (S19s1).
			# Disconnect right front power window switch connector from right front power window (S19s1).
			# Remove switch cover from right front power window switch (S19s1). For this purpose press retaining lugs (arrows) for right front power window switch (S19s1) together with suitable tool until right front power window switch (S19s1) can be pressed out of switch cover toward inside.
			# Install in the reverse order

	==Door Handle Latch Mechanism==		==Door Handle Latch Mechanism==

Pokseva: /* Removing and installing front door lock */

2017-08-07T11:09:02Z

Removing and installing front door lock

← Older revision		Revision as of 11:09, 7 August 2017
Line 114:		Line 114:
	# Remove door liner on front door		# Remove door liner on front door
	# Remove crank operated window on front door		# Remove crank operated window on front door
	# Unhook Bowden cable (1) for inside door opener onto door lock (6) and remove. Unclip holder (8) on lock. Open retainer (4) for unlocking bar (3).		# Unhook Bowden cable (1) for inside door opener onto door lock (6) and remove. Unclip holder (8) on lock.
			# Open retainer (4) for unlocking bar (3).
	# Press IRCL line (5) off door lock IRCL element		# Press IRCL line (5) off door lock IRCL element
	# Drill out blind rivets (arrows). Use 4.8 mm dia. drill for drilling out, taking care not to damage the inner door panel. Drive out remains of rivets with suitable drift. Remove remains of rivets and swarf from door, danger of rusting.		# Drill out blind rivets (arrows). Use 4.8 mm dia. drill for drilling out, taking care not to damage the inner door panel. Drive out remains of rivets with suitable drift. Remove remains of rivets and swarf from door, danger of rusting.

Pokseva: added instructions

2017-08-07T11:00:36Z

added instructions

Show changes