Headlamp cleaning system - Revision history

Pokseva: parts added

2023-02-11T19:49:03Z

parts added

@@ Line 186: / Line 186: @@
 Actuate catch for locking/unlocking connector (5c) (see arrow in figure at bottom right).
 == Parts ==
@@ Line 191: / Line 193: @@
 Check also the [[windshield washing system]].

Pokseva: remove nozzles / retrofit

2023-02-11T19:30:01Z

remove nozzles / retrofit

@@ Line 6: / Line 6: @@
 {|
-|[[File:W220_headlamp_cleaning_system_components.png|500px]]
+|[[File:W220_headlamp_cleaning_system_components.png|600px]]
 |Illustrated on model 220:
 * 1 - Telescoping nozzle
@@ Line 57: / Line 57: @@
 The internal counter is always reset to "0" whith circuit 15 off.
-=== Telescoping nozzles ===
+== Telescoping nozzles ==
 <!-- GF82.15-P-2100-01S  Telescoping nozzle headlamp cleaning system, location -->
@@ Line 84: / Line 84: @@
 Following the cleaning process the telescopes are retracted to the initial position by return springs.
-=== Parts ===
+=== Remove, install telescopic nozzle ===
-[[File:W220_headlamp_washer_EPC.png|thumb|none|Parts in [[EPC]] related to headlamp washing system]]
+{|
-Check also the [[windshield washing system]].
+Remove/install:
+# Remove lower engine compartment lining
-==Headlight Washer Removal==
+# Clamp off washing water hose (6) with clamp
 {{#ev:youtube|https://www.youtube.com/watch?v=B1_b6-ypTSM|320|left|Headlamp washer removal.|frame}}
 <br clear=all>

Pokseva: Headlamp cleaning system initial

2023-02-11T19:05:27Z

Headlamp cleaning system initial

← Older revision		Revision as of 19:05, 11 February 2023
Line 1:		Line 1:
			== Headlamp cleaning system (HCS) ==
			The purpose of headlamp cleaning system (HCS) is cleaning headlamp lenses.

			<!-- GF82.15-P-0002-03S Headlamp cleaning system (HCS), location of components -->
			Location of components:

			{\|
			\|[[File:W220_headlamp_cleaning_system_components.png\|500px]]
			\|Illustrated on model 220:
			* 1 - Telescoping nozzle
			* 2 - Washing water hose for headlamp cleaning system
			* M5/2 - Headlamp cleaning system pump
			* N10/6 - Left front SAM control module
			* N10/7 - Right front SAM control module
			* S1s1 - Headlamp cleaning system switch
			\|}

			<!-- GF82.15-P-0002-04S Headlamp cleaning system (HCS), interlinkage of components -->

			{\|
			\|[[File:W220_headlamp_cleaning_system_interlinkage.png\|500px]]
			\|
			Interlinkagae of components:
			* CAN (B) - CAN (passenger compartment)
			* M5/2 - Headlamp cleaning system pump
			* N10/6 - Left front SAM control module
			* N10/7 - Right front SAM control module
			* S1s1 - Headlamp cleaning system switch
			\|}

			<!-- GF82.15-P-0002S Headlamp cleaning system (HCS), function
			MODEL 215, 220 with CODE (600a) Headlamp cleaning system -->

			Function precondition:
			* Circuit 15 ON

			'''Manual operation'''

			* The headlamp cleaning system (HCS) is switched on by pressing the HCS switch (S1s1).
			* This connects the corresponding input of the left front SAM control unit (N10/6), which reads in the signal of the HCS switch (S1s1), to ground.
			* The left front SAM control unit (N10/6) places the switch-on pulse onto the class B Controller Area Network bus (interior) (CAN-B) as a message.
			* The right front SAM control unit (N10/7) reads in this message and connects circuit 15 to the HCS pump (M5/2) for a switch-on time of approx. 1 s via an electronic switch (transistor).
			* The HCS pump (M5/2) builds up water pressure in the line.
			* The water pressure acts against the return springs in the telescopic nozzle.
			* Before the telescopic nozzles extend, spraying water on the headlamp lenses.
			* After expiration of the switch-on time, the pressure in the water line decreases and the telescopic nozzles are retracted to their initial position by the spring force.

			Pressing the HCS switch (S1s1) again when a headlamp cleaning cycle is being performed has no effect.
			Another headlamp cleaning cycle cannot be activated until the preceding one has completed.

			'''Automatic operation (in vehicles as of 1.6.04)'''

			After the windshield washer system has been operated 15 times the HCS pump (M5/2) is actuated automatically.
			This automatic control is performed by the right front SAM control unit (N10/7).

			Function: For each actuation of the windshield washer fluid pump (M5/1) the internal counter in the right front SAM control unit (N10/7) is incremented by 1 until it reaches the value "15", then the HCS pump (M5/2) is actuated and the counter is reset to "0".
			The internal counter is always reset to "0" whith circuit 15 off.

			=== Telescoping nozzles ===

			<!-- GF82.15-P-2100-01S Telescoping nozzle headlamp cleaning system, location -->

			{\|
			\|[[File:W220_headlamp_cleaning_system_nozzles.png\|500px]]
			\|* 1 - Telescoping nozzles
			\|}

			<!-- GF82.15-P-2100S
			Telescoping nozzle headlamp cleaning system (HCS), location/purpose/design/ function
			MODEL 215, 220 with CODE (600a) Headlamp cleaning system -->

			The telescoping nozzles are hydraulically extending telescopic tubes with integrated return spring.
			They are not connected electrically.

			<!-- GF82.15-P-2100-04B
			Telescoping nozzle headlamp cleaning system, function -->
			When it starts running the washing water pump builds up pressure in the washing water line.
			The nozzles extend in a telescopic manner at a pressure of 1-1.6 bar.
			When a pressure of 3 bar is exceeded a valve opens on each telescoping nozzle
			and a precise quantity of washing water is sprayed onto the headlamp lenses.

			Eddy chambers are attached to the tips of the telescopic nozzles
			which control the spray from the water jets even at high vehicle speeds.
			Following the cleaning process the telescopes are retracted to the initial position by return springs.

			=== Parts ===

	[[File:W220_headlamp_washer_EPC.png\|thumb\|none\|Parts in [[EPC]] related to headlamp washing system]]		[[File:W220_headlamp_washer_EPC.png\|thumb\|none\|Parts in [[EPC]] related to headlamp washing system]]

Pokseva at 22:29, 19 March 2020

2020-03-19T22:29:00Z

← Older revision		Revision as of 22:29, 19 March 2020
Line 1:		Line 1:
	[[File:W220_headlamp_washer_EPC.png\|thumb\|none\|Parts in [[EPC]] related to headlamp washing system]]		[[File:W220_headlamp_washer_EPC.png\|thumb\|none\|Parts in [[EPC]] related to headlamp washing system]]

	Check also [[windshield washing system]].		Check also the [[windshield washing system]].

	==Headlight Washer Removal==		==Headlight Washer Removal==

Pokseva: EPC parts

2020-03-19T22:26:53Z

EPC parts

← Older revision		Revision as of 22:26, 19 March 2020
Line 1:		Line 1:
			[[File:W220_headlamp_washer_EPC.png\|thumb\|none\|Parts in [[EPC]] related to headlamp washing system]]

			Check also [[windshield washing system]].

	==Headlight Washer Removal==		==Headlight Washer Removal==

	{{#ev:youtube\|https://www.youtube.com/watch?v=B1_b6-ypTSM\|320\|left\|Headlamp washer removal.\|frame}}		{{#ev:youtube\|https://www.youtube.com/watch?v=B1_b6-ypTSM\|320\|left\|Headlamp washer removal.\|frame}}
	<br clear=all>		<br clear=all>

Pokseva: Pokseva moved page WIS 82.15 Headlamp Cleaning System to Headlamp cleaning system

2020-03-19T22:25:08Z

Pokseva moved page WIS 82.15 Headlamp Cleaning System to Headlamp cleaning system

← Older revision	Revision as of 22:25, 19 March 2020
(No difference)

Pokseva: fixed youtube url

2016-02-24T17:25:18Z

fixed youtube url

← Older revision		Revision as of 17:25, 24 February 2016
Line 1:		Line 1:
	==Headlight Washer Removal==		==Headlight Washer Removal==

	~~http~~://www.youtube.com/watch?v=B1_b6-ypTSM		{{#ev:youtube\|https://www.youtube.com/watch?v=B1_b6-ypTSM\|320\|left\|Headlamp washer removal.\|frame}}
			<br clear=all>

Ricebubbles: Added Headlight Washer Removal.

2015-03-11T06:49:05Z

Added Headlight Washer Removal.

New page

==Headlight Washer Removal==

http://www.youtube.com/watch?v=B1_b6-ypTSM