Pneumatic System Equipment (PSE) - Revision history

Pokseva: link to pump page added

2017-06-29T20:39:54Z

link to pump page added

← Older revision		Revision as of 20:39, 29 June 2017
Line 6:		Line 6:
	Before you let a less knowledgeable person convince you that you need a new pump, allow me to see if I can convince you otherwise.		Before you let a less knowledgeable person convince you that you need a new pump, allow me to see if I can convince you otherwise.

	The PSE pump performs several functions including locking/unlocking of doors, inflation of lumbar support bladders, extension and retraction of the trunk handle.		The [[Pneumatic_System_Equipment_(PSE)_Pump\|PSE pump]] performs several functions including locking/unlocking of doors, inflation of lumbar support bladders, extension and retraction of the trunk handle.
	This pump is located in left side in the trunk.		This pump is located in left side in the trunk.

Pokseva: understanding pump

2017-02-27T19:08:14Z

understanding pump

Show changes

Pokseva: /* DAS actual values */

2017-02-25T13:07:14Z

DAS actual values

← Older revision		Revision as of 13:07, 25 February 2017
Line 153:		Line 153:
	\|[[File:W220_DAS_PSE_actual_value_CL_signal_sources2.png\|thumb\|none\|Central locking signal sources (cont).]]		\|[[File:W220_DAS_PSE_actual_value_CL_signal_sources2.png\|thumb\|none\|Central locking signal sources (cont).]]
	\|[[File:W220_DAS_PSE_actual_value_CL_convenience_times_and_speed_thresholds.png\|thumb\|none\|CL convenience times and speed thresholds.]]		\|[[File:W220_DAS_PSE_actual_value_CL_convenience_times_and_speed_thresholds.png\|thumb\|none\|CL convenience times and speed thresholds.]]
			\|}

			==DAS development data==
			Incomplete list of development data available in DAS for PSE control unit (A2208001248).
			{\|
			[[File:W220_DAS_PSE_development_data_actual_values.png\|thumb\|none\|]]
	\|}		\|}

Pokseva: /* Error codes */

2017-02-25T13:04:22Z

Error codes

@@ Line 22: / Line 22: @@
 {|
 |{{#ev:youtube|https://www.youtube.com/watch?v=J3Hs9UzwdLY|320|left|Removing vacuum pump.|frame}}
 |}

Pokseva: /* DAS actual values */

2017-02-25T12:54:20Z

DAS actual values

@@ Line 60: / Line 60: @@
 |[[File:W220_DAS_PSE_actuation_deactivate_child_safety_lock_rear_doors.png|thumb|none|Deactivate the child safety lock of the rear doors.]]
 |[[File:W220_DAS_PSE_actuation_emergency_opening_simulating_crash_signal.png|thumb|none|Emergency opening by simulating the crash signal.]]
 |}

Pokseva: /* DAS actuations */

2017-02-25T12:44:28Z

DAS actuations

@@ Line 30: / Line 30: @@
 |[[File:W220_PSE_adaptations_menu.png|thumb|none|Adaptations menu.]]
 |[[File:W220_PSE_adaptations_list.png|thumb|none|List of adaptations.]]
-|[[File:W220_PSE_adaptation_trunk_lid_remote_release.png|thumb|none|Trunl lid remote release.]]
+|[[File:W220_PSE_adaptation_trunk_lid_remote_release.png|thumb|none|Trunk lid remote release.]]
 |}
 {|
@@ Line 46: / Line 46: @@
 |[[File:W220_PSE_adaptation_emergency_opening.png|thumb|none|Emergency opening.]]
 |[[File:W220_PSE_factory_settings_trunk_lid_remote_closing.png|thumb|none|Factory settings trunk lid remote closing.]]
 |}

Pokseva: DAS adaptations

2017-02-25T12:12:07Z

DAS adaptations

@@ Line 22: / Line 22: @@
 {|
 |{{#ev:youtube|https://www.youtube.com/watch?v=J3Hs9UzwdLY|320|left|Removing vacuum pump.|frame}}
 |}

Pokseva: Created page with "==Removing and installing PSE control module== {| |File:W220_Remo..."

2017-02-21T19:10:23Z

Created page with "==Removing and installing PSE control module==  {| |File:W220_Remo..."

New page

==Removing and installing PSE control module==


{|
|[[File:W220_Removing_and_installing_PSE_control_module.jpg]]
|
* 1 - Foam block
* 2 - Pneumatic strip
* 3 - Pneumatic strip
* 4 - Electrical connector
* A37 - PSE control module (combined)
|}

# Remove paneling in [[trunk]] (except right side paneling and rear wall paneling)
# Press apart plastic lugs (arrows) and remove foam cap (1)
# Unclip pneumatic strips (2, 3) on pneumatic control module with PSE control module (combined) (A37). Clips are located in the oblong holes marked with arrows. Unclip with flat tool, e.g. screwdriver.
# Loosen electrical connector (4) on PSE control module (combined) (A37) and remove lead. Turn in direction of arrow.
# Remove PSE control module (combined) (A37).
# Install in opposite order. If the PSE is replaced version coding must be accomplished via STAR DIAGNOSIS.
# Check central locking, lumbar support or multicontour backrest, power locking, head restraint extension and retraction for proper function.

{|
|{{#ev:youtube|https://www.youtube.com/watch?v=J3Hs9UzwdLY|320|left|Removing vacuum pump.|frame}}
|}