Workspace - Revision history

W220.ee at 15:08, 20 July 2021

2021-07-20T15:08:22Z

← Older revision		Revision as of 15:08, 20 July 2021
Line 808:		Line 808:
	To prevent triggering the tow-away alarm, switch off the tow-away alarm feature before towing the vehicle, or when parking on a surface subject to movement, such as a ferry or auto train.		To prevent triggering the tow-away alarm, switch off the tow-away alarm feature before towing the vehicle, or when parking on a surface subject to movement, such as a ferry or auto train.
	The switch is located on the center console.		The switch is located on the center console.
	~~[[File:...]]~~
	* (1) Indicator lamp		* (1) Indicator lamp
	* (2) Tow-away alarm off switch		* (2) Tow-away alarm off switch

Pokseva: /* Hazard warning flasher */

2017-08-30T18:28:21Z

Hazard warning flasher

← Older revision		Revision as of 18:28, 30 August 2017
Line 1,057:		Line 1,057:
	The seat ventilation for the driver's seat is automatically set to the highest level if activated via summer opening feature.		The seat ventilation for the driver's seat is automatically set to the highest level if activated via summer opening feature.


	~~===Hazard warning flasher===~~
	~~The hazard warning flasher can be activated with the starter switched on or off.~~
	~~It is activated automatically when an airbag is deployed.~~
	~~The switch is located on the center console.~~

	~~[[File:W220_hazard_warning_flasher_switch.jpg]]~~

	~~With the hazard warning flasher activated and the combination switch set for either left or right turn,~~
	~~only the respective left or right turn signals will operate when the SmartKey in the starter switch is in position '''1''' or '''2'''.~~

	==Interior lighting==		==Interior lighting==

Pokseva: /* Switching on fog lamps */

2017-08-30T18:26:10Z

Switching on fog lamps

← Older revision		Revision as of 18:26, 30 August 2017
Line 1,057:		Line 1,057:
	The seat ventilation for the driver's seat is automatically set to the highest level if activated via summer opening feature.		The seat ventilation for the driver's seat is automatically set to the highest level if activated via summer opening feature.


	~~===Switching on fog lamps===~~
	~~Fog lamps will operate with the parking lamps and/or the low beam headlamps on. Fog lamps should only be used in~~
	~~conjunction with low beam headlamps. Consult your State or Province Motor Vehicle Regulations regarding permissible lamp operation.~~

	~~The front fog lamps and rear fog lamp cannot be switched on manually with exterior lamp switch in position AUTO.~~
	~~To activate the fog lamps, turn exterior lamp switch and pull the exterior lamp switch to first or second stop.~~

	~~To switch on front fog lamps make sure the low beam headlamps are switched on.~~
	~~Pull out exterior lamp switch to first stop. The green indicator lamp in the lamp switch comes on.~~

	~~To switch on rear fog lamp make sure the low beam headlamps are switched on. Pull out exterior lamp switch to second stop.~~
	~~The yellow indicator lamp in the lamp switch comes on.~~

	===Hazard warning flasher===		===Hazard warning flasher===

Pokseva: /* Switching on high beams */

2017-08-30T18:23:13Z

Switching on high beams

@@ Line 1,070: / Line 1,070: @@
 To switch on rear fog lamp make sure the low beam headlamps are switched on. Pull out exterior lamp switch to second stop.
 The yellow indicator lamp in the lamp switch comes on.
 ===Hazard warning flasher===

Pokseva: /* =Turn signals and high beam */

2017-08-30T18:19:25Z

=Turn signals and high beam

← Older revision		Revision as of 18:19, 30 August 2017
Line 297:		Line 297:

	If you hear a warning signal and a message appears in the multifunction display when driving off, you have forgotten to release the parking brake. Release the parking brake.		If you hear a warning signal and a message appears in the multifunction display when driving off, you have forgotten to release the parking brake. Release the parking brake.

	~~===Turn signals and high beam==~~
	~~'''Combination switch'''~~
	~~The combination switch is located on the left of the steering column.~~
	~~[[File:W220_combination_switch_turn_signals_high_beam.jpg\|200px]]~~
	* (1) Turn signals, right
	* (2) Turn signals, left

	~~To signal minor directional changes, move combination switch to point of resistance only and release. The turn signal flashes three times.~~

	~~'''High beam'''~~
	~~Push the combination switch forward. The high beam headlamps are switched on.~~
	~~The high beam headlamp indicator in the tachometer comes on.~~

	===Windshield wipers===		===Windshield wipers===

Pokseva: /* Switching on headlamps */

2017-08-30T18:18:18Z

Switching on headlamps

← Older revision		Revision as of 18:18, 30 August 2017
Line 297:		Line 297:

	If you hear a warning signal and a message appears in the multifunction display when driving off, you have forgotten to release the parking brake. Release the parking brake.		If you hear a warning signal and a message appears in the multifunction display when driving off, you have forgotten to release the parking brake. Release the parking brake.

	~~==Switching on headlamps==~~
	~~'''Exterior lamp switch'''~~
	~~[[File:W220_exterior_lamp_switch.jpg\|200px]]~~
	* (1) Off
	* (2) Low beam headlamps on

	~~With the SmartKey removed and the driver’s door open, a warning sounds if the vehicle’s exterior lamps are not switched off.~~


	===Turn signals and high beam==		===Turn signals and high beam==

Pokseva: /* Lighting */

2017-08-30T18:17:42Z

Lighting

← Older revision		Revision as of 18:17, 30 August 2017
Line 1,079:		Line 1,079:
	The seat ventilation for the driver's seat is automatically set to the highest level if activated via summer opening feature.		The seat ventilation for the driver's seat is automatically set to the highest level if activated via summer opening feature.


	~~=== Lighting ===~~
	If you drive in countries where vehicles drive on the other side of the road than the country in which the vehicle is registered, you must have the headlamps modified for symmetrical low beams. Relevant information can be obtained at your authorized Mercedes-Benz Center.

	~~The exterior lamp switch is located on the dashboard to the left of the steering wheel.~~

	~~[[File:W220_exterior_lamp_switch_arrows.jpg]]~~

	* 0 - Off
	* AUTO - Automatic headlamp mode
	* Parking lamps (also side marker lamps, tail lamps, license plate lamps, instrument panel lamps). Canada only: When engine is running, the low beam is also switched on.
	* Parking lamps plus low beam or high beam headlamps (combination switch pushed forward).
	* Standing lamps, right (turn left one stop)
	* Standing lamps, left (turn left two stops)

	~~If you remove the SmartKey and open the driver's door while the parking~~
	~~lamps or low beam headlamps are switched on, then a warning sounds and~~
	~~a bulb appears in the multifunction display with the message "SWITCH OFF LIGHTS!".~~

	~~With the daytime running lamp mode activated and the engine running, the low beam headlamps cannot be switched off manually.~~
	~~To activate the daytime running lamp mode, see "Setting daytime running lamp mode (USA only)".~~

	~~'''Manual headlamp mode'''~~
	~~The low beam headlamps and parking lamps can be switched on and off with the exterior lamp switch.~~

	~~'''Automatic headlamp mode'''~~
	~~The parking lamps, low beam headlamps and license plate lamps switch on and off~~
	~~automatically depending on the brightness of the ambient light.~~
	~~Turn the exterior lamp switch to AUTO.~~

	Warning: If the exterior lamp switch is set to AUTO, the headlamps may switch off unexpectedly when the system senses bright ambient light, for example light from oncoming traffic. The headlamps will not be automatically switched on under foggy conditions.

	~~To minimize risk to you and to others, activate headlamps by turning exterior lamp switch when driving or when traffic and/or ambient lighting conditions require you to do so.~~
	In low ambient lighting conditions, only switch from position AUTO with the vehicle at a standstill. Switching from AUTO will briefly switch off the headlamps. Doing so while driving in low ambient lighting conditions may result in an accident.

	~~With the daytime running lamp mode activated, the low beam headlamps will not switch off automatically.~~

	~~'''Daytime running lamp mode'''~~
	~~Turn exterior lamp switch to position 0 or AUTO.~~
	~~When the engine is running, the low beam headlamps are automatically switched on.~~
	~~In low ambient light conditions, the parking lamps will also switch on.~~

	~~Canada only: When you shift from a driving position to position '''N''' or '''P''', the low beam switches off (with a three-minute delay).~~
	~~For nighttime driving you should turn the exterior lamp switch to permit activation of the high beam headlamps.~~

	USA only: The high beam headlamps can also be activated when driving with the daytime running lamp mode activated and exterior lamp switch in position 0. To activate the daytime running lamp mode, see "Setting daytime running lamp mode (USA only)".

	===Switching on fog lamps===		===Switching on fog lamps===

Pokseva: /* Lumbar support */

2017-08-30T17:47:17Z

Lumbar support

← Older revision		Revision as of 17:47, 30 August 2017
Line 1,058:		Line 1,058:

	== Seats ==		== Seats ==
	~~===Lumbar support===~~
	~~You can adjust the contour of the seat's lumbar support to best support your spine.~~
	~~The thumbwheel for the driver's and front passenger's seat are located on the inner side of the seat.~~

	~~[[File:W220_lumbar_support_thumbwheel.jpg]]~~

	~~Make sure the ignition is switched on.~~
	~~Set the lumbar support between 0 and 5.~~

	===Seat heating*===		===Seat heating*===
	[[File:W220_seat_heating_switch.png]]		[[File:W220_seat_heating_switch.png]]

Pokseva: /* Rear seat head restraints */

2017-08-30T17:46:36Z

Rear seat head restraints

@@ Line 1,058: / Line 1,058: @@
 == Seats ==
 ===Lumbar support===
 You can adjust the contour of the seat's lumbar support to best support your spine.

Pokseva: /* Removing and installing front seat head restraints */

2017-08-30T17:45:25Z

Removing and installing front seat head restraints

@@ Line 1,058: / Line 1,058: @@
 == Seats ==
 ===Rear seat head restraints===
 The rear head restraints cannot be removed.