Engine air filter: Difference between revisions
Jump to navigation
Jump to search
m (Pokseva moved page WIS 09.10 Air Filter to Engine air filter) |
(cleaned up; added photo of MANN air filter;) |
||
Line 1: | Line 1: | ||
== Part numbers == | |||
For engine [[M112]]/[[M113]]: | |||
* OE A1120940604 (63 EUR) | |||
* Bosch 1457433071 (20 EUR) | |||
* MANN C 3698/3-2 (20 EUR) | |||
[[File:W220_engine_air_filter_MANN_C369832.jpg|thumb|none|Engine air filter (MANN C 3698/3-2)]] | |||
== | == Replacement procedure == | ||
# Remove black intake tubes by pulling towards front of car. | |||
# Lift black plastic cover with MB logo. | |||
# Lift main engine cover and remove from car. | |||
# Flip over, loosen 4 torx screws on each airbox. | |||
# Remove filter, clean airbox out, and reinstall new filter. | |||
# Hand tighten the torx screws. | |||
# Replace main engine cover making sure its seated on MAF connection gasket | |||
# Push black intake tubes back on. | |||
# Replace front engine cover. | |||
Use an electric screw driver and a set of torx bits. This way you wont have to spend hours hand tightening all those screws back. | Tip: Use an electric screw driver and a set of torx bits. This way you wont have to spend hours hand tightening all those screws back. | ||
<!-- http://mbworld.org/forums/s-class-w220/282013-air-filter.html --> | |||
http://mbworld.org/forums/s-class-w220/282013-air-filter.html | |||
{| | {| | ||
|{{#ev:youtube|https://youtu.be/_HjiusDTcvk|320|center|W220 Engine Air Filter Replacement (By Masood)|frame}} | |{{#ev:youtube|https://youtu.be/_HjiusDTcvk|320|center|W220 Engine Air Filter Replacement (By Masood)|frame}} | ||
|} | |} |
Revision as of 13:19, 29 December 2021
Part numbers
- OE A1120940604 (63 EUR)
- Bosch 1457433071 (20 EUR)
- MANN C 3698/3-2 (20 EUR)
Replacement procedure
- Remove black intake tubes by pulling towards front of car.
- Lift black plastic cover with MB logo.
- Lift main engine cover and remove from car.
- Flip over, loosen 4 torx screws on each airbox.
- Remove filter, clean airbox out, and reinstall new filter.
- Hand tighten the torx screws.
- Replace main engine cover making sure its seated on MAF connection gasket
- Push black intake tubes back on.
- Replace front engine cover.
Tip: Use an electric screw driver and a set of torx bits. This way you wont have to spend hours hand tightening all those screws back.