View source for Removing and installing cover below instrument panel (left)

== Removing and installing cover below instrument panel (left) ==
<!-- AR68.10-P-1500M, Removing and installing cover below instrument panel (left), 13.1.98 -->

{|
|[[File:W220_remove_install_left_cover_below_instrument_panel.jpg]]
|
* 1 - Front cover
* 2 - Insert lugs
* 3 - Knee guard
* 4 - Screws
* 5 - Hook
|}

# Unscrew mounting nut for front cover (1)
# Slide front cover (1) with insert lugs (2) toward front out of knee guard (3) and remove downward out of guide (arrow) over accelerator pedal. Installation: Insert cover (1) in guide (arrow) on accelerator pedal.
# Unclip footwell lamp from knee guard (3) and disconnect connectors.
# Unscrew screws (4), (4 each)
# Push knee guard (3) with hooks (5), (4 each) toward rear out of instrument panel and simultaneously out of center console. Installation: Ensure that the side guide lug for the knee guard is inserted properly in the area of the center console (arrow).
# Install in opposite order

{|
|[[File:W220_cover_below_instrument_panel_left_bottom_B.jpg|thumb|none|Bottom cover (front).]]
|[[File:W220_cover_below_instrument_panel_left_bottom_A.jpg|thumb|none|Bottom cover (back).]]
|[[File:W220_cover_below_instrument_panel_left_top.jpg|thumb|none|Top cover removed.]]
|}