Sun visor: Difference between revisions
No edit summary |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:B69018000020.041110.png|thumb|none|Sun visor related parts in [[EPC]].]] | [[File:B69018000020.041110.png|thumb|none|Sun visor related parts in [[EPC]].]] | ||
== Flip-up cover == | == Flip-up cover == | ||
| Line 66: | Line 56: | ||
|} | |} | ||
=== Chinese clone === | |||
On Aliexpress it is possible to purchase a Chinese version for ~15 USD. | |||
The product is of good quality, the only difference is that it is fully plastic (there is no soft fabric layer). | |||
It might also happen that the leg that pulls microswitch (to light up the vanity light) has to be extended to reach the microswitch. | |||
{| | |||
|[[File:W220_sun_visor_flip-up_cover_chinese_clone.jpg|thumb|none|Original vs Chinese version]] | |||
|[[File:W220_sun_visor_flip-up_cover_chinese_clone_extending_leg.jpg|thumb|none|Leg extended to reach microswitch]] | |||
|{{#ev:youtube|https://www.youtube.com/watch?v=GlyKdCcq8ZQ|320|left|Sun visor flip-up cover (Chinese clone)|frame}} | |||
|} | |||
=== Microswitch === | |||
Though the sun visor hinge the ground connection for the [[LED_upgrade#Vanity_Mirror_Light|vanity mirror light]] is provided. | Though the sun visor hinge the ground connection for the [[LED_upgrade#Vanity_Mirror_Light|vanity mirror light]] is provided. | ||
| Line 79: | Line 83: | ||
|[[File:W220_sun_visor_mirror_microswitch.jpg|thumb|none|Sun visor mirror microswitch.]] | |[[File:W220_sun_visor_mirror_microswitch.jpg|thumb|none|Sun visor mirror microswitch.]] | ||
|[[File:W220_A2118700510_sun_visor_mirror_microswitch.jpg|thumb|none|Microswitch (A2118700510) removed.]] | |[[File:W220_A2118700510_sun_visor_mirror_microswitch.jpg|thumb|none|Microswitch (A2118700510) removed.]] | ||
|} | |||
== Fixing sagging sun visor == | |||
Problem: sunvisor has lost the "detent" notch when returning it from the down position back up to the raised position. As the visor is pushed towards the car ceiling/roof, it goes all the way up, but then it slightly flops down about 1/2 to 3/4" away from the normal position. | |||
Fix: Somehow, presumably with wear, the position or clocking of the detent moves from the original position. Only by a couple of degrees. Remove the visor, put a couple of washers under the mounting point farthest from the windshield. This puts a slight angle on the mounting point and allows the detent to catch (see video below). | |||
{| | |||
|{{#ev:youtube|https://www.youtube.com/watch?v=Tp5Av5ayrog|320|left|Removing and fixing sagging sun visor.|frame}} | |||
|} | |} | ||
Latest revision as of 00:58, 16 May 2021
Flip-up cover
The flip-up cover with plastic frame that clips over the visor mirror(s) is held in by 5 tabs. Especially in sunny area with age the plastic gets brittle and breaks. The part numbers are below. The price for the cover is ~45 EUR. The mirror is a separate part. Make sure to add the 4 digit color code to the part number (7G16 for alpaca gray color).
| Part No. | Notes |
|---|---|
| A2208104117 | left side, To Date: 22/11/2004 |
| A2208104517 | left side, From Date: 22/11/2004 |
| A2208104317 | left side, To Date: 22/11/2004, option 540A/570A/580A |
| A2208104717 | left side, From Date: 22/11/2004, option 540A/570A/580A |
| A2208104217 | right side, To Date: 22/11/2004 |
| A2208104617 | right side, From Date: 22/11/2004 |
| A2208104417 | right side, To Date: 22/11/2004, option 540A/570A/580A |
| A2208104817 | right side, From Date: 22/11/2004, option 540A/570A/580A |
 |
|
Chinese clone
On Aliexpress it is possible to purchase a Chinese version for ~15 USD. The product is of good quality, the only difference is that it is fully plastic (there is no soft fabric layer).
It might also happen that the leg that pulls microswitch (to light up the vanity light) has to be extended to reach the microswitch.
 |
 |
Microswitch
Though the sun visor hinge the ground connection for the vanity mirror light is provided.
 |
 |
The ground is connected when the flip-up cover lid is open and thereby the microswitch (part no. A2118700510) gets pressed.
 |
 |
 |
Fixing sagging sun visor
Problem: sunvisor has lost the "detent" notch when returning it from the down position back up to the raised position. As the visor is pushed towards the car ceiling/roof, it goes all the way up, but then it slightly flops down about 1/2 to 3/4" away from the normal position.
Fix: Somehow, presumably with wear, the position or clocking of the detent moves from the original position. Only by a couple of degrees. Remove the visor, put a couple of washers under the mounting point farthest from the windshield. This puts a slight angle on the mounting point and allows the detent to catch (see video below).