Door control module: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
In door panel hold by plastic clips. | In door panel hold by plastic clips. | ||
[[File:W220_door_panel_front.jpg|thumb|none|Front of door control module trim.]] | |||
[[File:W220_door_panel_back.jpg|thumb|none|Back of door control module trim.]] | |||
== Connectors == | == Connectors == | ||
Line 261: | Line 263: | ||
| | | | ||
|} | |} | ||
= Resources = | |||
Replacing DCM: https://www.youtube.com/watch?v=ElIIDz-vq4w | |||
Repairing water damage in DCM: https://www.youtube.com/watch?v=6hUF1DjqrWI | |||
Making your own DCM control buttons: http://www.benzworld.org/forums/w220-s-class/1624796-seeking-rh-headrest-adjuster-button.html |
Revision as of 22:07, 7 January 2015
Overview
The door control module in itself is pretty dumb device. All key presses are sent over CANBUS to SAM. SAM then broadcasts message to all modules and module which understands the message acts appropriately (whether lighting up some bulb, engaging seat heating, moving seat, etc.).
Location
In door panel hold by plastic clips.
Connectors
PICTURE
Using right hand drive DCM in left hand drive vehicle
It has been tested that RHD DCM A2208212179 installed on left side of LHD vehicle originally equipped with A2208214179 will work fine, however, the mirror controlling switch will not work and window controlling switch will be able open only driver's door window. Similarly, RHD DCM A2208211879 installed on left side of LHD vehicle originally equipped with A2208214979 will work fine, however, the window opening switch will open left side driver's door window.
Using left DCM on the right side
The physical location of DCM is programmed into DCM. E.g., if left DCM is connected to right side, the DCM will still move left seat.
Upgrading DCM to support seat ventilation
It seems that seat ventilation is not determined by DCM.
It has been tested that in the vehicle originally equipped with DCM A2208214179 and seat ventilation, can be used DCM A2208212179 with only heating buttons, by replacing heating buttons from DCM A2208212179 with heating and ventilation buttons from A2208214179.
Upgrading to DCM supporting memory seats
It seems that seat memory function is determined by DCM itself.
It has been tested that vehicle originally equipped with DCM A2208214179 in drivers doors can be replaced with DCM A2208211579 and memory seats will work out of the box. To mount DCM with memory buttons appropriate door panel with holes for memory buttons must be mounted. Alternatively, if memory functionality is not needed, one can replace front control board connected by wire with control board from A2208214179.
List of door control modules
Left hand drive vehicles
Front Left
Front Right
Rear Left
Rear Right
Part No. | Seen on | Features | Front | Back | Controls board | Board side A | Board side B |
---|---|---|---|---|---|---|---|
A2208212879 (A2208212379 for left side) | S600 2004, S600 2003 | Heated seats |
Right hand drive vehicles
Front Left
Front Right
Part No. | Seen on | Features | Front | Back | Controls board | Board side A | Board side B |
---|---|---|---|---|---|---|---|
A2208211879 (A2208212179 for left side) | S600 2003, S320 2003, S320 2004 | Cooled and heated seats |
Rear Left
Rear Right
Resources
Replacing DCM: https://www.youtube.com/watch?v=ElIIDz-vq4w
Repairing water damage in DCM: https://www.youtube.com/watch?v=6hUF1DjqrWI
Making your own DCM control buttons: http://www.benzworld.org/forums/w220-s-class/1624796-seeking-rh-headrest-adjuster-button.html