Rear seats: Difference between revisions
m (Pokseva moved page WIS 91.12 Rear Seats to Rear seats) |
No edit summary |
||
| Line 1: | Line 1: | ||
== Rear seat adjustment == | |||
[[File:W220_rear_power_head_restraints.png]] | |||
In vehicles equipped with option code ?? the switch can be used to adjust rear head restraint. | |||
[[File:W220_rear_power_seat_bench_feature.png]] | |||
In vehicles equipped with option code ?? the switches can be used to adjust rear: | |||
* (1) Seat bench fore and aft adjustment | |||
* (2) Head restraint fold/place upright | |||
[[File:W220_individual_rear_power_seats.png]] | |||
In vehicles equipped with option code ?? the switches can be used to adjust rear: | |||
* (1) Seat fore and aft adjustment | |||
* (2) Seat height | |||
* (3) Head restraint fold/place upright | |||
==Remove Rear Seat Backrest== | |||
Lower the head restraints. There are 2 torx bolts at the bottom of the backrest - remove these and if the car doesn’t have electrical rear seats, lift the backrest up about an inch and pull it right out. With electrical rear seats the centre seat squab and back-rest must be removed to expose two Torx screws securing the left and right rear back-rests at the centre top. | Lower the head restraints. There are 2 torx bolts at the bottom of the backrest - remove these and if the car doesn’t have electrical rear seats, lift the backrest up about an inch and pull it right out. With electrical rear seats the centre seat squab and back-rest must be removed to expose two Torx screws securing the left and right rear back-rests at the centre top. | ||
==Remove Rear Seat Bench== | |||
There are two push buttons under the bottom lip of the leather where it meets the floor carpet - run your fingers along until you feel the recess and just push it in. Do this on both sides of the car, and the bench can be lifted out. | There are two push buttons under the bottom lip of the leather where it meets the floor carpet - run your fingers along until you feel the recess and just push it in. Do this on both sides of the car, and the bench can be lifted out. | ||
Revision as of 22:12, 14 February 2017
Rear seat adjustment
In vehicles equipped with option code ?? the switch can be used to adjust rear head restraint.
In vehicles equipped with option code ?? the switches can be used to adjust rear:
- (1) Seat bench fore and aft adjustment
- (2) Head restraint fold/place upright
In vehicles equipped with option code ?? the switches can be used to adjust rear:
- (1) Seat fore and aft adjustment
- (2) Seat height
- (3) Head restraint fold/place upright
Remove Rear Seat Backrest
Lower the head restraints. There are 2 torx bolts at the bottom of the backrest - remove these and if the car doesn’t have electrical rear seats, lift the backrest up about an inch and pull it right out. With electrical rear seats the centre seat squab and back-rest must be removed to expose two Torx screws securing the left and right rear back-rests at the centre top.
Remove Rear Seat Bench
There are two push buttons under the bottom lip of the leather where it meets the floor carpet - run your fingers along until you feel the recess and just push it in. Do this on both sides of the car, and the bench can be lifted out.