Windshield wiper: Difference between revisions

From W220 S-Class Encyclopedia
Jump to navigation Jump to search
(Started detail for Windshield Wiper.)
 
(Added detail for Reset Automatic Windshield Wiper Function)
Line 16: Line 16:


http://w220.ee/images/1/1d/W220_Wiper_Blade_Form.JPG
http://w220.ee/images/1/1d/W220_Wiper_Blade_Form.JPG
'''Reset Automatic Windshield Wiper Function'''
* Two people are required for this task as the doors have to be closed to reset this function.
* First, pull and reseat your windshield wiper relays (locations are on the fuse diagram usually found in the tool compartment in your spare wheel well).
* With engine running and all passenger doors closed, starting at 0 turn on wipers to #3 position, then put the switch in the 0 position then put it in the auto #1 (rain sensor position).
* Then have your assistant splash water on the windshield.
* The Automatic Windshield Wipers should now function normally.

Revision as of 04:14, 11 March 2015

Windshield Wiper Replacement

A set of Bosch Aerotwin 3397118946 Original Equipment Replacement Bracketless Wiper Blades, Pack of 2 is $41 at amazon with free US shipping.

http://www.benzworld.org/forums/w220-s-class/1635251-s-cl-class-wiper-blades.html

Windshield Wiper Blades Only Replacement

It is possible, and much cheaper to replace only the wiper blades, but make sure that the new blades have the correct form.

Length: 685mm (27”)

Width: 6mm

Form:

W220_Wiper_Blade_Form.JPG

Reset Automatic Windshield Wiper Function

  • Two people are required for this task as the doors have to be closed to reset this function.
  • First, pull and reseat your windshield wiper relays (locations are on the fuse diagram usually found in the tool compartment in your spare wheel well).
  • With engine running and all passenger doors closed, starting at 0 turn on wipers to #3 position, then put the switch in the 0 position then put it in the auto #1 (rain sensor position).
  • Then have your assistant splash water on the windshield.
  • The Automatic Windshield Wipers should now function normally.