Engine oil

DIY - Engine Oil and Filter Service

http://www.youtube.com/watch?v=qiHp18HzLsU&feature=youtube_gdata_player

http://www.youtube.com/watch?v=O8DAT8bSpYw&feature=related

and with thanks to BenzWorld Member G-AMG.

http://www.benzworld.org/forums/g-class/1310577-photo-diy-extraction-oil-change.html

Tips - Engine Oil and Filter Service

If using the suction method, cut the end of the tube at a 45 degree angle and have the engine slightly warm so the oil flows easily and then it usually won't suck the tube closed.

Run the engine for 5 to 10 minutes to heat up and thin oil. Oil should be 140°F-160° F [60°-71°C]. Turn off engine prior to removing oil.

Make sure the car is level. If not, you won’t be getting all of the oil out of the pan, no matter which method you use.

First, forget about refilling the new oil via the Oil Filler Cap. While you have the filter assembly out, pour the fresh oil down that huge hole. Less chance to spill, no funnel needed and no funnel to clean up afterwards. (Obviously, if you drained the oil, be sure to put the drain plug back in first!)

Very important: The correct filter is a fleece filter, eg. MANN Part HU7185X Oil Filter Kit. Do not make the mistake of buying the cheaper paper filter.

Extended Oil Change Interval

http://www.benzworld.org/forums/w220-s-class/2056753-servicing-w220.html

Oil Checking

TBA