Remove/install bottom engine compartment paneling

From W220 S-Class Encyclopedia
Revision as of 15:07, 17 July 2021 by Pokseva (talk | contribs) (added parts)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Remove/install bottom engine compartment paneling

  1. On vehicles with fire extinguishing system: remove fire extinguisher system motor temperature sensor (B65) from center engine compartment paneling. Failure to observe can lead to actuation of fire extinguishing system!
  2. Remove bolts (1) and remove lower engine compartment paneling. Removal sequence:
    1. rear engine compartment paneling
    2. center engine compartment paneling
    3. front right engine compartment paneling (A)
    4. front left engine compartment paneling (B).
  3. Install in the reverse order. Installation: Install front right and left engine compartment paneling (A, B) so that the rubber lips are covered by the bumper.

Rear engine compartment paneling

  • 1 - Screw


  • B65 - Engine fire extinguishing system temperature sensor

Center engine compartment paneling

  • 1 - Screw

Front engine compartment paneling

  • 1 - Screw
  • A - Front right engine compartment paneling
  • B - Front left engine compartment paneling

Parts

Engine compartment panelling parts in EPC

Sheet metal screw (170):

  • OE - A0019906036
  • FEBI BILSTEIN 104072
FEBI BILSTEIN 104072

Clip type nut (180):

  • A0049943145
  • FEBI_BILSTEIN_47816
Clip nut fastener A0049943145
FEBI BILSTEIN 47816

Screw and washer assembly (190):

  • N000000001410
N000000001410

Spring nut - oil pan undershield (200):

  • OE - A0049941845
  • FEBI BILSTEIN 47846
FEBI BILSTEIN 47846
Retrieved from "https://w220.wiki/index.php?title=Remove/install_bottom_engine_compartment_paneling&oldid=8219"