Pneumatic System Equipment (PSE): Difference between revisions
Jump to navigation
Jump to search
(DAS adaptations) |
|||
| Line 30: | Line 30: | ||
|[[File:W220_PSE_adaptations_menu.png|thumb|none|Adaptations menu.]] | |[[File:W220_PSE_adaptations_menu.png|thumb|none|Adaptations menu.]] | ||
|[[File:W220_PSE_adaptations_list.png|thumb|none|List of adaptations.]] | |[[File:W220_PSE_adaptations_list.png|thumb|none|List of adaptations.]] | ||
|[[File:W220_PSE_adaptation_trunk_lid_remote_release.png|thumb|none| | |[[File:W220_PSE_adaptation_trunk_lid_remote_release.png|thumb|none|Trunk lid remote release.]] | ||
|} | |} | ||
{| | {| | ||
| Line 46: | Line 46: | ||
|[[File:W220_PSE_adaptation_emergency_opening.png|thumb|none|Emergency opening.]] | |[[File:W220_PSE_adaptation_emergency_opening.png|thumb|none|Emergency opening.]] | ||
|[[File:W220_PSE_factory_settings_trunk_lid_remote_closing.png|thumb|none|Factory settings trunk lid remote closing.]] | |[[File:W220_PSE_factory_settings_trunk_lid_remote_closing.png|thumb|none|Factory settings trunk lid remote closing.]] | ||
|} | |||
==DAS actuations== | |||
Actuations available in DAS for PSE control unit (A2208001248). | |||
{| | |||
|[[File:W220_DAS_PSE_actuations.png|thumb|none|List of actuations.]] | |||
|[[File:W220_DAS_PSE_actuation_unlock_trunk_lid.png|thumb|none|Unlock trunk lid.]] | |||
|[[File:W220_DAS_PSE_actuation_open_close_central_locking.png|thumb|none|Open or close central locking.]] | |||
|} | |||
{| | |||
|[[File:W220_DAS_PSE_actuation_lower_raise_head_restraints.png|thumb|none|Lower or raise head restraints.]] | |||
|[[File:W220_DAS_PSE_actuation_deactivate_child_safety_lock_rear_doors.png|thumb|none|Deactivate the child safety lock of the rear doors.]] | |||
|[[File:W220_DAS_PSE_actuation_emergency_opening_simulating_crash_signal.png|thumb|none|Emergency opening by simulating the crash signal.]] | |||
|} | |} | ||
Revision as of 15:44, 25 February 2017
Removing and installing PSE control module
|
|
- Remove paneling in trunk (except right side paneling and rear wall paneling)
- Press apart plastic lugs (arrows) and remove foam cap (1)
- Unclip pneumatic strips (2, 3) on pneumatic control module with PSE control module (combined) (A37). Clips are located in the oblong holes marked with arrows. Unclip with flat tool, e.g. screwdriver.
- Loosen electrical connector (4) on PSE control module (combined) (A37) and remove lead. Turn in direction of arrow.
- Remove PSE control module (combined) (A37).
- Install in opposite order. If the PSE is replaced version coding must be accomplished via STAR DIAGNOSIS.
- Check central locking, lumbar support or multicontour backrest, power locking, head restraint extension and retraction for proper function.
DAS adaptations
Adaptations available in DAS for PSE control unit (A2208001248).
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DAS actuations
Actuations available in DAS for PSE control unit (A2208001248).
 |
 |
 |
 |
 |
 |