Tail lights: Difference between revisions
(→LED board: added images of A2208200311 v2.6 front) |
(→LED board: added A2208200311 DEPO image) |
||
| Line 56: | Line 56: | ||
== LED board == | == LED board == | ||
For break light W220 taillights use LED board. | For the break light W220 taillights use LED board. | ||
A2208200411 - right | A2208200411 - right | ||
| Line 63: | Line 63: | ||
There seem to be two versions of LED boards. | There seem to be two versions of LED boards. | ||
V2.2 which square LED bulbs and V2.5/V2.6 | V2.2 which has square LED bulbs and V2.5/V2.6 which has round LED bulbs. | ||
{| | {| | ||
|[[File: | |[[File:W220_A2208200311_v2.6_front.jpg|thumb|none|A2208200311 v2.6 front.]] | ||
|[[File: | |[[File:W220_A2208200311_v2.6_back.jpg|thumb|none|A2208200311 v2.6 back.]] | ||
|} | |} | ||
{| | {| | ||
|[[File: | |[[File:W220_A2208200411_front.jpg|thumb|none|A2208200411 v2.5 front.]] | ||
|[[File: | |[[File:W220_A2208200411_back.jpg|thumb|none|A2208200411 v2.5 back.]] | ||
|} | |} | ||
| Line 81: | Line 81: | ||
{| | {| | ||
|[[File:W220_A2208200411_DEPO_front.jpg|thumb|none|A2208200411 | |[[File:W220_A2208200311_DEPO_front.jpg|thumb|none|DEPO A2208200311-compatible front.]] | ||
|[[File:W220_A2208200411_DEPO_back.jpg|thumb|none|A2208200411 DEPO | |[[File:W220_A2208200311_DEPO_back.jpg|thumb|none|DEPO A2208200311-compatible back. Reads "DEPO MD E4 0211985 17-440-1919L".]] | ||
|[[File:W220_A2208200411_DEPO_front.jpg|thumb|none|DEPO A2208200411-compatible front.]] | |||
|[[File:W220_A2208200411_DEPO_back.jpg|thumb|none|DEPO A2208200411-compatible back. Reads "DEPO MD E4 0211985 17-440-1919R".]] | |||
|} | |} | ||
Revision as of 02:52, 4 April 2015
Back to: WIS 82.10 Exterior Lights
Location – Tail Lights
Facelift (after 30/09/2002)
A2208200764 - tail lamp left A2208200864 - tail lamp right
Pre-facelift (before 01/09/2002)
A2208200164 - tail lamp left A2208200264 - tail lamp right
Aftermarket
DEPO
Note: DEPO taillight should not be mixed with original facelift taillights, since DEPO taillight is a bit lighter (see below).
DEPO
01-440-1919R-R
02 S1
02 IB
00 ? 01 2
00 F 02 R
E4
11985
DEPO
01-440-1919L-R
02 S1
02 IB
01 2? 00 ?
02 R 00 F
E4
11985
W221 Style
Removing
- Open your trunk and take the cover out.
- There are four screws, remove them (see below).
LED board
For the break light W220 taillights use LED board.
A2208200411 - right
A2208200311 - left
There seem to be two versions of LED boards. V2.2 which has square LED bulbs and V2.5/V2.6 which has round LED bulbs.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Replacing LED bulbs
The whole LED board unit is expensive. LED bulbs can be replaced by soldering.
- Remove the taillight from vehicle.
- Take the circuit board out, it is attached by one screw (see below).
- Use a 12v adapter by connecting it to the circuit board and see which bulbs are damaged.
- Remove damaged bulbs and install new ones using a soldering iron. Make sure the new led lights are positioned the same exact way the old ones were, otherwise they will not work.
- Once this is done, you can insert the circuit board back into the car. Make sure prior to this all the lights are working.
You can buy square LED bulbs by using this keyword "LED 7.62MM 638NM ALINGAP RED CLR - LTL912SEKSA".
Washer
