Removing and installing front floor covering (left)

From W220 S-Class Encyclopedia
Jump to navigation Jump to search

Removing and installing front floor covering (left)

  • 1 - Edge guard
  • 2 - Door sill molding
  • 3 - Clip
  • 4 - Panel
  • 5 - Clip
  • 6 - Accelerator pedal
  • 7 - Floor covering
  1. Move front seat back as far as possible
  2. Remove cover below instrument panel (left)
  3. Pull off door sill molding (2). Door sill molding fastened with 3 clips.
  4. Pull off edge guard (1) in lower area on A-pillar
  5. Remove panel (4). Fastened with 2 clips in addition.
  6. Remove accelerator pedal (6)
  7. Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
  8. Install in opposite order
Door still molding.
Side panel.
Floor covering removed.
Retrieved from "https://w220.wiki/index.php?title=Removing_and_installing_front_floor_covering_(left)&oldid=6235"