View source for WIS 67.39 Electric Side Windows

==Description - Electric Side Windows==
The Electric Side Windows which are commonly called Power Windows allow opening and closing of the windows in the front and rear doors.

Two types of actuation are possible:
* Manual opening and closing,
* Automatic one-touch opening and closing feature.

All windows in the front and rear doors can be opened and closed with the remote control key or the lock switches (USA & Japan only) via the [[WIS 80.45 Convenience Feature (CF) / Convenience Locking System|Convenience Feature]].

When a window button is pressed digital signals are sent via the CAN Bus to the relevant Door Control Module (DCM) which activates the relevant window motor.

'''Example of CAN B Bus Networking'''

[[File:Example_of_W220_CAN_B.JPG|500px|center]]

==Location of Components for Electric Side Windows==
TBA

==Switches - Electric Side Windows==
TBA

==Motor - Electric Side Windows==
TBA

==Issues - Electric Side Windows==
* If windows do not open/close with the one-touch button press, then resetting, normalisation or calibration is required.
* Windows require resetting, normalisation or calibration following a voltage supply interruption or malfunction, eg after removing the battery terminals.

==Reset - Electric Side Windows==
* Press and hold the window UP button for the electric window until the side window is closed and hold the switch for a further one second.
* Repeat the procedure for each window.