Removing and installing front floor covering (right): Difference between revisions
Jump to navigation
Jump to search
(Created page with "<!-- AR68.20-P-2070M, Removing and installing front floor covering (right), MODEL 215, 220, 8.12.97 --> Illustrated on model 220: {| |File:W220_remove_install_right_front_f...") |
No edit summary |
||
| Line 1: | Line 1: | ||
==Removing and installing front floor covering (right)== | |||
<!-- AR68.20-P-2070M, Removing and installing front floor covering (right), MODEL 215, 220, 8.12.97 --> | <!-- AR68.20-P-2070M, Removing and installing front floor covering (right), MODEL 215, 220, 8.12.97 --> | ||
{| | {| | ||
|[[File:W220_remove_install_right_front_floor_covering.png]] | |[[File:W220_remove_install_right_front_floor_covering.png]] | ||
| Line 16: | Line 15: | ||
# Move front seat back as far as possible | # Move front seat back as far as possible | ||
# [[Remove cover below instrument panel ( | # [[Removing and installing cover below instrument panel (right)|Remove cover below instrument panel (right)]]. (''No need to remove in practice.'') | ||
# Pull off door sill molding (2). Door sill molding fastened with 3 clips. | # Pull off door sill molding (2). Door sill molding fastened with 3 clips. | ||
# Pull off edge guard (1) in lower area on A-pillar | # Pull off edge guard (1) in lower area on A-pillar | ||
Latest revision as of 17:52, 29 April 2017
Removing and installing front floor covering (right)
|
|
- Move front seat back as far as possible
- Remove cover below instrument panel (right). (No need to remove in practice.)
- Pull off door sill molding (2). Door sill molding fastened with 3 clips.
- Pull off edge guard (1) in lower area on A-pillar
- Remove panel (4). Fastened with 2 clips in addition.
- Lift floor covering (8) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
- Install in opposite order
 |
 |
 |