Exterior mirrors: Difference between revisions
(→Facelift: update) |
(fault code added) |
||
| Line 1: | Line 1: | ||
== Facelift == | == Facelift == | ||
[[File:W220_exterior_mirror_facelift.jpg| | [[File:W220_exterior_mirror_facelift.jpg|thumb|none|Exterior mirror of [[facelift]] vehicle.]] | ||
=== Parts === | === Parts === | ||
| Line 49: | Line 46: | ||
|[[File:W220_exterior_mirror_motor_A2038202242_back.jpg|thumb|none|A2038202242 (back).]] | |[[File:W220_exterior_mirror_motor_A2038202242_back.jpg|thumb|none|A2038202242 (back).]] | ||
|[[File:W220_exterior_mirror_motor_A2038202242_connector.jpg|thumb|none|A2038202242 (connector pins).]] | |[[File:W220_exterior_mirror_motor_A2038202242_connector.jpg|thumb|none|A2038202242 (connector pins).]] | ||
|} | |||
{| class="wikitable" | |||
! Error Code | |||
! Generated By | |||
! Description | |||
|- | |||
|B1208 | |||
|DCM-FL - Door control module front left | |||
|The signal from component M21/1r3 (Mirror in/out adjustment potentiometer) is faulty. | |||
|} | |} | ||
| Line 71: | Line 78: | ||
|[[File:W220_right_mirror_glass_A2208101821_front.jpg|thumb|none|A2208101821 (front).]] | |[[File:W220_right_mirror_glass_A2208101821_front.jpg|thumb|none|A2208101821 (front).]] | ||
|[[File:W220_right_mirror_glass_A2208101821_back.jpg|thumb|none|A2208101821 (back).]] | |[[File:W220_right_mirror_glass_A2208101821_back.jpg|thumb|none|A2208101821 (back).]] | ||
|} | |||
=== DIY === | |||
{| | |||
|{{#ev:youtube|https://www.youtube.com/watch?v=ObAZFkrLjC0|320|left|Remove mirror cover ([[facelift]]).|frame}} | |||
|} | |} | ||
== Pre-facelift == | == Pre-facelift == | ||
[[File:W220_exterior_mirror_prefacelift.jpg| | [[File:W220_exterior_mirror_prefacelift.jpg|thumb|none|Exterior mirror of pre-[[facelift]] vehicle.]] | ||
=== DIY === | |||
* Remove the mirror cover by pressing in a small spring clip at the top. | * Remove the mirror cover by pressing in a small spring clip at the top. | ||
Revision as of 21:48, 13 February 2017
Facelift
Parts
 |
 |
Outside rearview mirror
Part number A2208100576 (left) and A2208100876 (right). The part comes without glass and cover as shown in the picture below. The part is attached to front door using 3 A0029843729 (M4X22) bolts.
 |
 |
Mirror cover
Part number for mirror cover is A2208100964 (left) and A2208101064 (right). The part comes without turn signal light module.
 |
 |
 |
Turn signal light
Turn signal light (blinker lamp) has part number A2208200521 (left) and A2208200621 (right).
For the vanity light bulb there is LED upgrade available.
 |
 |
Adjustment motor
Electronic adjustment motor A2038202242 is used on both sides.
 |
 |
 |
| Error Code | Generated By | Description |
|---|---|---|
| B1208 | DCM-FL - Door control module front left | The signal from component M21/1r3 (Mirror in/out adjustment potentiometer) is faulty. |
Seals
Mirror seals (gaskets) have part number A2208110198 (left) and A2208110298 (right).
 |
 |
Glass
Original mirror glass is expensive high theft risk part (especially driver's side mirror for option code 249 - INSIDE AND OUTSIDE MIRROR AUTOMATIC DIMMING).
Aftermarket mirrors with heating are available in ebay for as cheap as 15 EUR.
 |
 |
 |
DIY
Pre-facelift
DIY
- Remove the mirror cover by pressing in a small spring clip at the top.
- Release the mirror housing cover by also pressing in a spring clip near the outer edge.