Exhaust system: Difference between revisions
Jump to navigation
Jump to search
Ricebubbles (talk | contribs) |
Ricebubbles (talk | contribs) |
||
Line 22: | Line 22: | ||
* Tap the '''complete''' exhaust system with a rubber mallet while listening for the rattle. If you are lucky it is often a broken strap or bracket making the noise. If you are unlucky you may have the dreaded interval issue with the catalytic converters. | * Tap the '''complete''' exhaust system with a rubber mallet while listening for the rattle. If you are lucky it is often a broken strap or bracket making the noise. If you are unlucky you may have the dreaded interval issue with the catalytic converters. | ||
* One enthusiast discovered it was a slight rattle coming from a rear cat. He took a hammer and put a little dent in the bottom of the cat to keep the internals from moving around and making noise. He reported after one year that the cats were still rattle free. |
Revision as of 02:19, 14 March 2019
Description - Exhaust Pipes, Catalytic Converter, Mufflers
Issues - Exhaust Pipes, Catalytic Converter, Mufflers
- Occasionally the exhaust system will develop an annoying but quiet rattle. This may be a simple loose bracket or clamp.
- Occasionally the exhaust system will develop an intermittent but very loud rattle. W220's are known to have an issue with the catalytic converters which come apart internally and make a loud rattling sound at particular engine speeds (around 2,500 RPM) and temperatures (sometimes only when the cat is hot). M-B issued an eight year / 80,000 mile (125,000 Km) warranty to cover the failed catalytic converters. Some owners have found that it is mostly the rear cats that fail.
- Catalytic converters must not be disposed of as regular scrap. The catalytic converter contains valuable rare earth metals, which can be recycled.
Tips - Exhaust Pipes, Catalytic Converter, Mufflers
- When reassembling a new or repaired exhaust system apply high temperature anti-seize copper grease to all the gaskets, seal rings, flange surfaces, and bolt threads. You will really appreciate having done this next time the system has to come apart.
- Also cover all exposed bolt threads with silicon to prevent corrosion. The silicon is easily peeled off before undoing the next time. If you have previously used the copper anti-seize grease you will be able to undo the nut by hand.
Parts - Exhaust Pipes, Catalytic Converter, Mufflers
- 210 Seal Ring Catalyst on Flange Right 1269970041 and 2024920181
- 220 Seal Ring Catalyst on Flange Left 140920281 and 202490281
- 245 Seal Ring Left to Right Pipe to Exhaust Pipe 2024920281 ie same as 220 Seal Ring Catalyst on Flange Left
- OEM catalytic converters cost around $1,200 but cheap aftermarket cats are available for under $300 installed.
DIY Procedures - Exhaust Pipes, Catalytic Converter, Mufflers
- To investigate an annoying rattle jack the vehicle up and place on stands. (TIP: You may find that When you put the car up on front jack stands only, it will not rattle. One BenzWorld enthusiast Had to level out the back of the car to get the rattle going.)
- Tap the complete exhaust system with a rubber mallet while listening for the rattle. If you are lucky it is often a broken strap or bracket making the noise. If you are unlucky you may have the dreaded interval issue with the catalytic converters.
- One enthusiast discovered it was a slight rattle coming from a rear cat. He took a hammer and put a little dent in the bottom of the cat to keep the internals from moving around and making noise. He reported after one year that the cats were still rattle free.