SmartKey: Difference between revisions
(initial version) |
|||
| Line 10: | Line 10: | ||
==Panic alarm== | ==Panic alarm== | ||
W220s sold in the US and Canada have a panic button on the SmartKey keyfob. W220s sold elsewhere in the world do not have a panic button. | |||
[[File:W220_SmartKey_with_without_panic_button.jpg|thumb|none|SmartKey without and with panic button.]] | |||
[[File:W220_smartkey_panic_button.jpg]] | [[File:W220_smartkey_panic_button.jpg]] | ||
If panic button is pressed an audible alarm and flashing exterior lamps will operate for approximately 2.5 minutes. | |||
To activate press and hold button (1) for at least one second. | To activate press and hold button (1) for at least one second. | ||
To deactivate press button (1) again or insert SmartKey in starter switch. | To deactivate press button (1) again or insert SmartKey in starter switch. | ||
==Replacing batteries== | ==Replacing batteries== | ||
Revision as of 19:27, 28 January 2017
SmartKey with remote control
|
|
Panic alarm
W220s sold in the US and Canada have a panic button on the SmartKey keyfob. W220s sold elsewhere in the world do not have a panic button.
If panic button is pressed an audible alarm and flashing exterior lamps will operate for approximately 2.5 minutes.
To activate press and hold button (1) for at least one second. To deactivate press button (1) again or insert SmartKey in starter switch.
Replacing batteries
Replacement batteries: Lithium, type CR 2025 or equivalent.
Remove mechanical key (1). Insert the mechanical key (1) in side opening and push gray slide. The battery compartment is unlatched. Pull the battery compartment (2) out of the SmartKey housing in direction of arrow. Remove the batteries.
Using a lint-free cloth, insert new batteries (3) under the contact spring (4) with the plus (+) side facing up. Return battery compartment into housing until it locks into place.
In case of KEYLESS-GO the SmartKey contains only a single battery on the other side.
