Removing and installing front floor covering (left)

From W220 S-Class Encyclopedia
Revision as of 11:16, 22 April 2017 by Pokseva (talk | contribs) (Created page with "==Removing and installing front floor covering (left)== <!-- AR68.20-P-2050M, MODEL 215, 220, Removing and installing front floor covering (left), 8.12.97 --> {| |File:W220...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Removing and installing front floor covering (left)

  • 1 - Edge guard
  • 2 - Door sill molding
  • 3 - Clip
  • 4 - Panel
  • 5 - Clip
  • 6 - Accelerator pedal
  • 7 - Floor covering
  1. Remove front seat (W220)
  2. Move front seat back as far as possible (W215)
  3. Remove cover below instrument panel (left)
  4. Pull off door sill molding (2). Door sill molding fastened with 3 clips.
  5. Pull off edge guard (1) in lower area on A-pillar
  6. Remove panel (4). Fastened with 2 clips in addition.
  7. Remove accelerator pedal (6)
  8. Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
  9. Install in opposite order
Retrieved from "https://w220.wiki/index.php?title=Removing_and_installing_front_floor_covering_(left)&oldid=6222"