Removing and installing front floor covering (right)

From W220 S-Class Encyclopedia
Revision as of 17:40, 29 April 2017 by Pokseva (talk | contribs) (Created page with "<!-- AR68.20-P-2070M, Removing and installing front floor covering (right), MODEL 215, 220, 8.12.97 --> Illustrated on model 220: {| |File:W220_remove_install_right_front_f...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Illustrated on model 220:

  • 1 - Edge guard
  • 2 - Door sill molding
  • 3 - Clip
  • 4 - Panel
  • 5 - Clip
  • 6 - Cap
  • 7 - Screw
  • 8 - Floor covering
  1. Move front seat back as far as possible
  2. Remove cover below instrument panel (left) (No need to remove in practice.)
  3. Pull off door sill molding (2). Door sill molding fastened with 3 clips.
  4. Pull off edge guard (1) in lower area on A-pillar
  5. Remove panel (4). Fastened with 2 clips in addition.
  6. Lift floor covering (8) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
  7. Install in opposite order
Door still molding removed.
Side panel.
Floor covering removed.
Retrieved from "https://w220.wiki/index.php?title=Removing_and_installing_front_floor_covering_(right)&oldid=6246"