|
|
| Line 1: |
Line 1: |
| == Oil specification==
| |
|
| |
|
| MB approved engine oils and other fluids (Gasoline, Diesel, Transmission, Engine, Gear, Differential, Brake, Refrigerant, Compressor, Windshield Washer, Wax):
| |
| http://bevo.mercedes-benz.com/bevolistenmain.php?entercustomer=true&language_id=1
| |
|
| |
| ==Oil change interval==
| |
| Extended Oil Change Interval: http://www.benzworld.org/forums/w220-s-class/2056753-servicing-w220.html
| |
|
| |
| ==Checking oil level==
| |
| TBA
| |
|
| |
| ==Engine oil change procedure==
| |
|
| |
| See the engine [[oil filter]] page for the correct type of [[oil filter]].
| |
|
| |
| {|
| |
| |{{#ev:youtube|https://www.youtube.com/watch?v=4Q18wCrw4s0|320|left||frame}}
| |
| |{{#ev:youtube|https://www.youtube.com/watch?v=qiHp18HzLsU|320|left||frame}}
| |
| |{{#ev:youtube|https://www.youtube.com/watch?v=O8DAT8bSpYw|320|left||frame}}
| |
| |}
| |
| <!-- With thanks to BenzWorld Member G-AMG.
| |
| http://www.benzworld.org/forums/g-class/1310577-photo-diy-extraction-oil-change.html
| |
| -->
| |
|
| |
| === Tips ===
| |
| * Oil should be 140°F-160° F [60°-71°C].
| |
| * If using the suction method, cut the end of the tube at a 45 degree angle.
| |
| * Warm the engine slightly so the oil flows easily and then it usually won't suck the tube closed.
| |
| * Run the engine for 5 to 10 minutes to heat up and thin the oil.
| |
| * Turn off engine prior to removing oil.
| |
| * Make sure the car is level. If not, you won't be getting all of the oil out of the pan, no matter which method you use.
| |
| * Forget about refilling the new oil via the Oil Filler Cap. While you have the [[oil filter]] assembly out, pour the fresh oil down that huge hole. Less chance to spill, no funnel needed and no funnel to clean up afterwards.
| |
| * If using the oil drain method be sure to put the drain plug back before refilling.
| |