Removing and installing front floor covering (left): Difference between revisions
Jump to navigation
Jump to search
(Created page with "==Removing and installing front floor covering (left)== <!-- AR68.20-P-2050M, MODEL 215, 220, Removing and installing front floor covering (left), 8.12.97 --> {| |File:W220...") |
(No difference)
|
Revision as of 12:16, 22 April 2017
Removing and installing front floor covering (left)
|
- Remove front seat (W220)
- Move front seat back as far as possible (W215)
- Remove cover below instrument panel (left)
- Pull off door sill molding (2). Door sill molding fastened with 3 clips.
- Pull off edge guard (1) in lower area on A-pillar
- Remove panel (4). Fastened with 2 clips in addition.
- Remove accelerator pedal (6)
- Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
- Install in opposite order