Removing and installing front floor covering (right): Difference between revisions
Jump to navigation
Jump to search
(Created page with "<!-- AR68.20-P-2070M, Removing and installing front floor covering (right), MODEL 215, 220, 8.12.97 --> Illustrated on model 220: {| |File:W220_remove_install_right_front_f...") |
(No difference)
|
Revision as of 18:40, 29 April 2017
Illustrated on model 220:
|
- Move front seat back as far as possible
- Remove cover below instrument panel (left) (No need to remove in practice.)
- Pull off door sill molding (2). Door sill molding fastened with 3 clips.
- Pull off edge guard (1) in lower area on A-pillar
- Remove panel (4). Fastened with 2 clips in addition.
- Lift floor covering (8) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
- Install in opposite order